Dye-Sublimation Printer from Clogging

A dye-sublimation printer may get clogged if not used for a long time. For this reason, it needs regular cleaning. But if you don’t know how to keep dye-sublimation printers from clogging, you need expert advice.

We are bringing you some tips to remove clogs or to keep your printer trouble-free while staying at home. This guide explains everything related to sublimation printers and their clogging problem in detail.

How To Clean Clogging:

To begin, make every effort to maintain your authentic printer as clean of residue and buildup as possible. This is true for almost any piece of equipment in your creative studio since residue can cause a variety of problems.

Avoid any possible danger. When it comes to refilling the ink tanks, the residue might also be an issue. Simply open the front of each ink tank supply for as long as it takes to top up the ink; the residue in the air will settle onto the toner where you top off the ink in no time.

Whether you’re using certified bottles or the needle method, you’ll want to take your time filling the ink slowly to avoid air bubbles. Air pockets might also impede your printer and cause print quality concerns.

This is a basic way of cleaning or removing clogs and if you want your sublimation printer to stay active and avoid all types of clogging, then here is what you can do.

  • Run the printer for a few minutes once a week to clear the ink cartridges and prevent the tips from becoming clogged. If you don’t switch on the printer for an extended period of time, it may separate.
  • Before plugging up the printer, make sure the print head is centered. If the print is removed from the center point for an extended period of time, the print quality may deteriorate.
  • Don’t place the printer in a high position on its head; keep it level.
  • If you aren’t using the printer for more than fourteen days, you should have it serviced by a technician at that time.
  • Disengage any loaded media before racking the printer to avoid the tension rollers causing clogs in the nozzles, which might cause blockages or damage to the print head.
  • If the printer has been turned off for an extended period of time, clean the print head jets.
  • If fine residue clings to the print head, the tips may get obstructed, and you may not be able to print at all.
  • Ensure that the waste color chamber is set up, even if the printer is turned off.
  • Regardless of whether the printer is switched off, the ink that has accumulated in the waste ink tank may seep out.
  • Keep all of the printer’s covers closed to prevent free waste from entering. If the printer is not used for a long time, cover it with an anti-static cloth or another covering.

Keeping Printer Heads and Nozzles Clean:

You’ll need to clean the print heads every now and again to maintain your sublimation printer. Routine sublimation printer maintenance is critical for ensuring high-quality prints with no errors.

You can clean the print head nozzles clean for some printers using your PC. The method is given below.

Print Head Nozzle Cleaning on a PC:

  • Go to your Epson sublimation printer’s Printing Preferences on a PC. You must first do a printhead nozzle check before performing a cleanup.
  • Select Print Head Nozzle Check from the drop-down menu. A paper with four colored lines/networks will be printed by your printer.
  • If all of the lines are straight and connected, the spouts are complete, and you may click “Done.”
  • If any of the lines while printing are uneven or have holes in the center, it’s likely that the nozzle is blocked. Under the Nozzle Check button, you’ll need to perform the Print Head Cleaning cycle.
  • You can conduct another printhead nozzle check test print after each cleaning to see if the problem has been resolved. Resume to clean the nozzles until you get thick lines.

Also Check:


This was a guide on how to keep dye-sublimation printers from clogging. The guide explains some basic ways to clean the print head nozzles and remove the clogs in easy steps. For more, see FAQ.


What other ways can be used to remove clogging from sublimation printers?

Water can be used to break down or relax a blockage. Place the print head in a basin of water for a short period of time. Most print heads can be immersed for as long as it takes to evaporate the contact focuses before being re-embedded in the printer.

Can you fix clogging with heat?

Yes, high temperatures can fix clogging. Because different substances are used to make different compounds, the same temperature will have a different effect on how they dissolve.

As a result, while clearing the print head, you should use high-temperature water. Furthermore, the temperature may range from 90 to 120 degrees Fahrenheit.

Similar Posts

Leave a Reply